74ABT574APW,118
| Parameters | |
|---|---|
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 400MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 30mA |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT574 |
74ABT574APW,118 Overview
The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). It is included in the package Tape & Reel (TR). This output is configured with Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. A 4.5V~5.5Vsupply voltage is required for it to operate. Temperature is set to -40°C~85°C TA. A flip flop of this type is classified as a D-Type. JK flip flop belongs to the 74ABTseries of FPGAs. Its output frequency should not exceed 400MHz. In total, it contains 1 elements. As a result, it consumes 250μA quiescent current and is not affected by external forces. A total of 20terminations have been recorded. The object belongs to the 74ABT574 family. A voltage of 5V is used to power it. This T flip flop has a capacitance of 3pF farads at the input. A device of this type belongs to the family of ABT. This device has the base part number FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 5.5V. Normally, the supply voltage (Vsup) should be above 4.5V. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. An electrical current of 5V volts is applied to it. A D flip flop with 2embedded ports is available. In addition, you can refer to the additinal BROADSIDE VERSION OF 374 of the D latch.
74ABT574APW,118 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT574APW,118 Applications
There are a lot of NXP USA Inc. 74ABT574APW,118 Flip Flops applications.
- Buffer registers
- Counters
- Count Modes
- Balanced Propagation Delays
- Control circuits
- Asynchronous counter
- Event Detectors
- Clock pulse
- Frequency division
- QML qualified product
