74ABT574CSC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 200MHz |
| Base Part Number | 74ABT574 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 3.2 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 50μA |
| Current - Output High, Low | 32mA 64mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -32mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 64mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ABT574CSC Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. D flip flop is included in the Tubepackage. Tri-State, Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis used in the operation. It is an electronic flip flop with the type D-Type. The 74ABTseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 200MHz. A total of 1elements are contained within it. This process consumes 50μA quiescents. This D latch belongs to the family of 74ABT574. JK flip flop input capacitance is 5pF farads. This electronic part is mounted in the way of Surface Mount. The 20pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. There are 8bits in this flip flop. The superior flexibility is achieved through the use of 8 circuits. For high efficiency, the supply voltage should be kept at 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Currently, there are 1 lines of input. In this case, the high level output current is set to -32mA. 64mA is the low level output current. If the operating temperature is lower than 85°C, it is recommended. Ideally, the operating temperature should be greater than -40°C. Initially, it requires a voltage of 4.5V as the minimum supply voltage. A maximum voltage of 5.5V can be provided by it. It is possible to obtain a frequency of 200MHz.
74ABT574CSC Features
Tube package
74ABT series
20 pins
8 Bits
74ABT574CSC Applications
There are a lot of ON Semiconductor 74ABT574CSC Flip Flops applications.
- Event Detectors
- ESCC
- Individual Asynchronous Resets
- Matched Rise and Fall
- Buffer registers
- Computing
- Registers
- Supports Live Insertion
- Storage registers
- Guaranteed simultaneous switching noise level
