74ABT823D,623
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT823 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 200MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 6.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 6.8 ns |
| Power Supply Current-Max (ICC) | 34mA |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74ABT823D,623 Overview
The item is packaged in 24-SOIC (0.295, 7.50mm Width)cases. As part of the package Tape & Reel (TR), it is embedded. As configured, the output uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. A 4.5V~5.5Vsupply voltage is required for it to operate. It is operating at -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74ABTseries of FPGAs. There should be no greater frequency than 200MHzon its output. The element count is 1 . It consumes 250μA of quiescent There are 24 terminations,JK flip flop belongs to 74ABT823 family. A voltage of 5V is used to power it. This T flip flop has a capacitance of 4pF farads at the input. It is a member of the ABTfamily of D flip flop. It is part of the FF/Latchesbase part number family. As soon as 5.5Vis reached, Vsup reaches its maximum value. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. It operates from 5V power supplies. This flip flop has a total of 2ports. In addition, WITH CLEAR AND CLOCK ENABLEis a characteristic of it.
74ABT823D,623 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT823D,623 Applications
There are a lot of NXP USA Inc. 74ABT823D,623 Flip Flops applications.
- Buffered Clock
- Latch-up performance
- Single Down Count-Control Line
- Matched Rise and Fall
- Differential Individual
- Registers
- Computers
- Bus hold
- Memory
- EMI reduction circuitry
