74ABT823DB,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT823 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 200MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 6.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 6.8 ns |
| Power Supply Current-Max (ICC) | 34mA |
| Height Seated (Max) | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74ABT823DB,118 Overview
As a result, it is packaged as 24-SSOP (0.209, 5.30mm Width). As part of the package Tape & Reel (TR), it is embedded. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. Temperature is set to -40°C~85°C TA. This D latch has the type D-Type. It belongs to the 74ABTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 200MHz. A total of 1 elements are present. As a result, it consumes 250μA quiescent current. A total of 24terminations have been recorded. D latch belongs to the 74ABT823 family. Power is provided by a 5V supply. JK flip flop input capacitance is 4pF farads. In terms of electronic devices, this device belongs to the ABTfamily of devices. There is a base part number FF/Latchesfor the RS flip flops. In this case, the maximum supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The system runs on a power supply of 5V watts. The D flip flop is embedded with 2ports. As an additional reference, you may refer to electronic flip flop WITH CLEAR AND CLOCK ENABLE.
74ABT823DB,118 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT823DB,118 Applications
There are a lot of NXP USA Inc. 74ABT823DB,118 Flip Flops applications.
- Supports Live Insertion
- Count Modes
- Modulo – n – counter
- Latch-up performance
- Load Control
- Data storage
- Clock pulse
- Reduced system switching noise
- Communications
- Patented noise
