74ABT841D,602
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2014 |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION; WITH POWER-UP RESET |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT841 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 10:10 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Family | ABT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Power Supply Current-Max (ICC) | 38mA |
| Independent Circuits | 1 |
| Delay Time - Propagation | 4ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74ABT841D,602 Overview
In the package 24-SOIC (0.295, 7.50mm Width), it can be found. A Tube package is used to package it. In this configuration, the output is set to Tri-State. This electrical device has a logic type of D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. A 4.5V~5.5V supply voltage is required to operate it. The operating temperature is -40°C~85°C. 74ABT is the series number of this FPGA. The design of this electronic part contains 10 bits. In this device, there are 24 terminations that have been designed. It is a member of the 74ABT841 family. The device is operated when the supply voltage is set to 5V. 24 pins are included. ABT is the family of this electronic device. 2 ports are available on this device. Subcategory FF/Latches includes this part. 5.5V is the maximum supply voltage (Vsup). The device is powered by 5V power supplies. A voltage greater than 4.5V must be supplied as a power supply (Vsup). In addition, POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION; WITH POWER-UP RESET characterize it. In order for the device to operate at its maximum power, the maximum power current (ICC) of 38mA is needed for operation.
74ABT841D,602 Features
24-SOIC (0.295, 7.50mm Width) package
74ABT series
10 Bits
74ABT841 family
24 pin count
5V power supplies
74ABT841D,602 Applications
There are a lot of NXP USA Inc. 74ABT841D,602 Latches applications.
- Buffer register
- Frequency
- Parallel-to-Serial Data Conversion
- Ring counter
- Shift Registers
- Relay
- Pattern generators
- Bus system register with enable parallel lines at bus side
- Parallel data storage
- Shift register
