74ABT841DB,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION; WITH POWER-UP RESET |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT841 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 10:10 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Family | ABT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.2 ns |
| Power Supply Current-Max (ICC) | 38mA |
| Independent Circuits | 1 |
| Delay Time - Propagation | 4ns |
| Height Seated (Max) | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74ABT841DB,118 Overview
A package called 24-SSOP (0.209, 5.30mm Width) contains it. Tape & Reel (TR) is the way in which it is packaged. It is configured with an output of Tri-State. This electrical device has Logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. It operates with a supply voltage of 4.5V~5.5V. During operation, the temperature is set at -40°C~85°C. This FPGA is part of the 74ABT series. It is designed with 10 bits. In this device, there are 24 terminations that have been designed. There is no doubt that it belongs to the family 74ABT841. A 5V voltage supply is required for operation. There are 24 pins attached to it. ABT is the family of this electronic device. 2 ports are available on this device. It belongs to the subcategory of FF/Latches. Vsup reaches 5.5V as the maximum supply voltage. 5V power supplies are needed to operate it. In order to operate properly, the supply voltage (Vsup) should be greater than 4.5V. Its reliable performance makes it an excellent choice for TAPE AND REEL. There are also characteristics of POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION; WITH POWER-UP RESET associated with it. As its maximal power current (ICC) reaches 38mA, it is able to operate.
74ABT841DB,118 Features
24-SSOP (0.209, 5.30mm Width) package
74ABT series
10 Bits
74ABT841 family
24 pin count
5V power supplies
74ABT841DB,118 Applications
There are a lot of NXP USA Inc. 74ABT841DB,118 Latches applications.
- Ring counter
- PCs and Notebooks
- Parallel data synchronization
- Frequency dividing
- Watches
- Network Switches
- Four-bit storage with output enable
- Display driver
- Address register
- Decade counting
