Parameters |
Terminal Pitch |
0.65mm |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74ABT841 |
Pin Count |
24 |
JESD-30 Code |
R-PDSO-G24 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
10:10 |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
10 |
Family |
ABT |
Output Characteristics |
3-STATE |
Current - Output High, Low |
32mA 64mA |
Logic Type |
D-Type Transparent Latch |
Output Polarity |
TRUE |
Max I(ol) |
0.064 A |
Prop. Delay@Nom-Sup |
6.2 ns |
Power Supply Current-Max (ICC) |
38mA |
Independent Circuits |
1 |
Delay Time - Propagation |
4ns |
Length |
7.8mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2014 |
Series |
74ABT |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION; WITH POWER-UP RESET |
Subcategory |
FF/Latches |
Technology |
BICMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
74ABT841PW,112 Overview
24-TSSOP (0.173, 4.40mm Width) contains it. Packaged in the way of Tube. The output it is configured with uses Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Electronic components are mounted using the Surface Mount method. A 4.5V~5.5V voltage supply is required for operation. There is a temperature of -40°C~85°C at which the system operates. There are a number of FPGAs in this series, including this one. The design of this electronic part contains 10 bits. This device is designed with 24 terminations. As a member of the 74ABT841 family, it falls under that category. With the supply voltage set at 5V, it is able to operate. It is equipped with 24 pin count. ABT is the family of this electronic device. This device has 2 ports on board, which are all available at the same time. This part is included in FF/Latches. 5.5V is the maximum voltage (Vsup) that can be supplied. A total of 5V power supplies are needed to run it. If the supply voltage (Vsup) is greater than 4.5V, then the device is working correctly. It is also characterized by POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION; WITH POWER-UP RESET. The maximal power current (ICC) supplied for its operation reaches 38mA.
74ABT841PW,112 Features
24-TSSOP (0.173, 4.40mm Width) package
74ABT series
10 Bits
74ABT841 family
24 pin count
5V power supplies
74ABT841PW,112 Applications
There are a lot of NXP USA Inc. 74ABT841PW,112 Latches applications.
- Pattern Generators
- Flip-flops
- Frequency dividing
- Shift left with parallel loading
- Avionics
- Parallel data synchronization
- Relay
- Automotive HEV/EV Powertrain
- Up-Down Johnson
- Control circuits