banner_page

74ABTH162460DLG4

56 Terminations4.5V~5.5V 56 Pin 74ABTH162460 Signal switch74ABTH Series 1 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74ABTH162460DLG4
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 134
  • Description: 56 Terminations4.5V~5.5V 56 Pin 74ABTH162460 Signal switch74ABTH Series 1 Functions(Kg)

Details

Tags

Parameters
Independent Circuits 1
Count Direction BIDIRECTIONAL
Translation N/A
Height Seated (Max) 2.79mm
Width 7.49mm
RoHS Status ROHS3 Compliant
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Number of Pins 56
Operating Temperature -40°C~85°C
Packaging Tube
Series 74ABTH
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
Type Multiplexer/Demultiplexer
Technology BICMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.635mm
Reach Compliance Code unknown
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74ABTH162460
Pin Count 56
Qualification Status Not Qualified
Circuit 1 x 4:1
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.5V
Number of Ports 5
Number of Bits 4
Propagation Delay 6.9 ns
Family ABT
Logic Function Transceiver
Output Characteristics 3-STATE WITH SERIES RESISTOR
Current - Output High, Low 32mA 64mA; 12mA 12mA
Supply Type Single
Max I(ol) 0.064 A
Prop. Delay@Nom-Sup 6.5 ns
Power Supply Current-Max (ICC) 32mA
Voltage Supply Source Single Supply

74ABTH162460DLG4 Overview


This is a relatively small item of digital switch that is included in the 56-BSSOP (0.295, 7.50mm Width) in order to save space on the board.In this case, it is packaged as Tube.For mounting, digital switch ic uses the method Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer/Demultiplexer.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.As a member of 74ABTH series, the multiplexers can be used for a wide range of applications.Among its basic features are 56 terminations.There is a base part number 74ABTH162460 that can be used to locate signal switch's related components as well.For multiplexer's system, 5V voltage is supplied.A component pin count of 56 can be found on this turn signal switch.A conductor terminates at GULL WING.In this case, the supply type is Single.This multiplexer ic has 56 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of ABT.In this signal multiplexer, there are 4 bits provided.To avoid unnecessary failures, keep the supply voltage at 4.5V (Vsup).It is advisable to keep the maximum supply voltage (Vsup) at 5.5V so as to avoid some unnecessary failures.A power supply is provided for mux switch's normal operation of 5V.The resistance is 5.

74ABTH162460DLG4 Features


Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V

74ABTH162460DLG4 Applications


There are a lot of Texas Instruments 74ABTH162460DLG4 Signal Switches / Multiplexers / Decoders applications.

  • Electronic circuits
  • Memory system of computers
  • Code converters
  • Small scale TV wall
  • Frequency multiplexing system
  • Make half adder
  • Data communication
  • Control unit of Central Processing unit (CPU)
  • Encrypted communications system
  • Image transmission

Write a review

Note: HTML is not translated!
    Bad           Good