74ABTH162460DLRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ABTH |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | Multiplexer/Demultiplexer |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABTH162460 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 4:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 5 |
| Number of Bits | 4 |
| Propagation Delay | 6.9 ns |
| Family | ABT |
| Logic Function | Transceiver |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 32mA 64mA; 12mA 12mA |
| Supply Type | Single |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 6.5 ns |
| Power Supply Current-Max (ICC) | 32mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height Seated (Max) | 2.79mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
74ABTH162460DLRG4 Overview
Due to the lack of space on the board, digital switch is provided in the 56-BSSOP (0.295, 7.50mm Width).It is packaged according to the Tape & Reel (TR) method.As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses IC Multiplexer/Demultiplexer as the analog IC.The operating temperature of -40°C~85°C will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sMultiplexers of the 74ABTH series can be used in a wide range of applications.There is a design for terminating 56 as part of its basic configuration.To find signal switch's related components, a base part number of 74ABTH162460 may also be used.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch has 56 component pins.As the end of conductors, it uses GULL WING.In this case, the supply type is Single.A configuration of 56 pins is used.As you can see, it is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the ABT family.The multiplexer ic provides 4 bits.The minimal supply voltage (Vsup) should be kept at 4.5V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V so as to avoid some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 5V.The switches is packaged according to the way of TAPE AND REEL.5 is the resistance at which it operates.
74ABTH162460DLRG4 Features
Supplied in the 56-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
74ABTH162460DLRG4 Applications
There are a lot of Texas Instruments 74ABTH162460DLRG4 Signal Switches / Multiplexers / Decoders applications.
- VGA
- Electronics industry
- Code conversion
- Data transfer
- Communication system
- A/D converters
- Time division multiplexing system
- Metal detectors
- Automation system
- Relay
