74ABTH16823DGGRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 252.792698mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABTH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ABTH16823 |
| Function | Master Reset |
| Number of Outputs | 18 |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Clock Frequency | 150MHz |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 3.9 ns |
| Family | ABT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 500μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 5.5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 6.8 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Power Supply Current-Max (ICC) | 80mA |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 150000000Hz |
| Length | 14mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ABTH16823DGGRE4 Overview
It is embeded in 56-TFSOP (0.240, 6.10mm Width) case. Package Tape & Reel (TR)embeds it. It is configured with Tri-State, Non-Invertedas an output. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. The supply voltage is set to 4.5V~5.5V. It is operating at a temperature of -40°C~85°C TA. It is an electronic flip flop with the type D-Type. The FPGA belongs to the 74ABTH series. Its output frequency should not exceed 150MHz Hz. The list contains 2 elements. T flip flop consumes 500μA quiescent energy. A total of 56terminations have been recorded. The 74ABTH16823family includes it. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 4pFfarads. It is a member of the ABTfamily of D flip flop. The electronic part is mounted in the way of Surface Mount. The 56pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. The system runs on a power supply of 5V watts. There are 2 ports embedded in the flip flops. High efficiency requires the supply voltage to be maintained at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 64mA. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Additionally, you may refer to the D latch's additional WITH CLEAR AND CLOCK ENABLE.
74ABTH16823DGGRE4 Features
Tape & Reel (TR) package
74ABTH series
56 pins
5V power supplies
74ABTH16823DGGRE4 Applications
There are a lot of Texas Instruments 74ABTH16823DGGRE4 Flip Flops applications.
- Automotive
- Shift Registers
- Memory
- Latch
- Control circuits
- Registers
- EMI reduction circuitry
- Computers
- Data storage
- Storage Registers
