74AC109SC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | JK Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 150MHz |
| Base Part Number | 74AC109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Output Current | 24mA |
| Number of Bits | 2 |
| Clock Frequency | 175MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 5 |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC109SC Overview
As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). It is contained within the Tubepackage. Differentialis the output configured for it. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 2V~6Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. JK Typeis the type of this D latch. In terms of FPGAs, it belongs to the 74AC series. Its output frequency should not exceed 175MHz Hz. A total of 2elements are present in it. There is 2μA quiescent consumption. If you search by 74AC109, you will find similar parts. This JK flip flop has a 4.5pFfarad input capacitance. A part of the electronic system is mounted in the way of Surface Mount. This board is designed with 16pins on it. Its clock edge trigger type is Positive Edge. The design is based on 2bits. Its flexibility is enhanced by 2 circuits. Its output current of 24mAallows for maximum design flexibility. There are 2 output lines in this JK flip flop. It is reported that there are 5 input lines. -24mAis set as the high level output current. It is set to 24mAfor the low level output current. Operating temperatures should be lower than 85°C. A temperature above -40°Cshould be used for the operation. The system operates with a minimum supply voltage of 2V. There is a maximum supply voltage of 6V. The frequency that can be achieved is 150MHz.
74AC109SC Features
Tube package
74AC series
16 pins
2 Bits
74AC109SC Applications
There are a lot of ON Semiconductor 74AC109SC Flip Flops applications.
- Frequency division
- Consumer
- Data storage
- ESD performance
- Automotive
- Bus hold
- Frequency Dividers
- Matched Rise and Fall
- EMI reduction circuitry
- Balanced 24 mA output drivers
