74AC11074D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 3V~5.5V |
| Base Part Number | 74AC11074 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Output Current | 24mA |
| Clock Frequency | 150MHz |
| Propagation Delay | 12.2 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4.2 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 7.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AC11074D Overview
It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). The Tubepackage contains it. T flip flop uses Differentialas the output. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. A supply voltage of 3V~5.5V is required for operation. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. It belongs to the 74ACseries of FPGAs. Its output frequency should not exceed 150MHz Hz. JK flip flop belongs to 74AC11074 family. A JK flip flop with a 3.5pFfarad input capacitance is used here. It is mounted by the way of Surface Mount. The 14pins are designed into the board. It has a clock edge trigger type of Positive Edge. To achieve this superior flexibility, 2 circuits are used. For high efficiency, the supply voltage should be kept at 5V. With an output current of 24mA, this device offers maximum design flexibility. To operate, the chip has a total of 1 output lines. In terms of quiescent current, it consumes 4μA .
74AC11074D Features
Tube package
74AC series
14 pins
74AC11074D Applications
There are a lot of Texas Instruments 74AC11074D Flip Flops applications.
- QML qualified product
- Computers
- Instrumentation
- Single Down Count-Control Line
- Parallel data storage
- Data Synchronizers
- Frequency Dividers
- Differential Individual
- Balanced 24 mA output drivers
- Individual Asynchronous Resets
