74AC11074DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 3V~5.5V |
| Base Part Number | 74AC11074 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Output Current | 24mA |
| Clock Frequency | 150MHz |
| Propagation Delay | 12.2 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4.2 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 7.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AC11074DR Overview
The package is in the form of 14-SOIC (0.154, 3.90mm Width). It is included in the package Tape & Reel (TR). T flip flop uses Differentialas the output. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. A 3V~5.5Vsupply voltage is required for it to operate. It is operating at a temperature of -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74ACseries FPGA. In order for it to function properly, its output frequency should not exceed 150MHz. You can search similar parts based on 74AC11074. Its input capacitance is 3.5pF farads. The electronic part is mounted in the way of Surface Mount. A total of 14pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. To achieve this superior flexibility, 2 circuits are used. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. As a result of its output current of 24mA, it is very flexible in terms of design. To operate, the chip has a total of 1 output lines. 4μAquiescent current consumed.
74AC11074DR Features
Tape & Reel (TR) package
74AC series
14 pins
74AC11074DR Applications
There are a lot of Texas Instruments 74AC11074DR Flip Flops applications.
- Asynchronous counter
- Communications
- ATE
- Synchronous counter
- Differential Individual
- Data transfer
- Latch-up performance
- Instrumentation
- Convert a momentary switch to a toggle switch
- Matched Rise and Fall
