banner_page

74AC16373DLG4

D-Type, Latch 8 Bits Latches 48 Pins DUAL CMOS SSOP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74AC16373DLG4
  • Package: SSOP
  • Datasheet: PDF
  • Stock: 104
  • Description: D-Type, Latch 8 Bits Latches 48 Pins DUAL CMOS SSOP(Kg)

Details

Tags

Parameters
Contact Plating Gold
Mount Surface Mount
Package / Case SSOP
Number of Pins 48
Weight 600.301152mg
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 48
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.635mm
Pin Count 48
Operating Supply Voltage 5V
Number of Elements 2
Polarity Non-Inverting
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.5V
Min Supply Voltage 3V
Load Capacitance 50pF
Number of Ports 2
Current - Output 24mA
Number of Bits 8
Propagation Delay 22.3 ns
Quiescent Current 8μA
Turn On Delay Time 10.6 ns
Family AC
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Prop. Delay@Nom-Sup 10 ns
High Level Output Current -24mA
Low Level Output Current 24mA
Control Type ENABLE LOW/HIGH
Power Supply Current-Max (ICC) 0.08mA
Number of Input Lines 16
Count Direction UNIDIRECTIONAL
Translation N/A
Height 2.59mm
Length 15.88mm
Width 7.49mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

74AC16373DLG4 Overview


In the SSOP package, it is embedded. An electronic part with 8 bits is designed. In this device, there are 48 terminations that have been designed. With the supply voltage set at 5V, it is able to operate. 48 pins are included. This electronic device belongs to the family of AC. In addition, it is designed with a pin number of 48. This electronic part is mounted in the way of Surface Mount. In this device, there is a total of 2 ports available for use. The part belongs to the FF/Latches subcategory. Electronic circuits are represented by 16 input lines. For maximum efficiency, the supply voltage should be set to 5V. It consumes 8μA of quiescent current without being affected by outside factors. In total, it has 2 elements. When the maximum power current (ICC) is supplied for its operation, it reaches 0.08mA. It has been set to 24mA for the low level output current. -24mA is set as the high level output current. It is recommended to work at a temperature lower than 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. Voltages up to 5.5V can be supplied. With a voltage of 3V, it operates at its minimum capacity. A BUS DRIVER logic IC is used. Due to its 24mA output current, it offers maximum design flexibility.

74AC16373DLG4 Features


SSOP package
8 Bits
48 pin count
48 pins
2 elements

74AC16373DLG4 Applications


There are a lot of Texas Instruments 74AC16373DLG4 Latches applications.

  • Parallel Input
  • Counter timers
  • Serial Output Data Queuing
  • Stacked or Push-Down Registers
  • Serial Input
  • Shift left register
  • Accumulator Registers
  • Counting
  • Frequency
  • Parallel data synchronization

Write a review

Note: HTML is not translated!
    Bad           Good