74AC16373DLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74AC16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 22.3 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 10.6 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 10 ns |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Input Lines | 16 |
| Independent Circuits | 2 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AC16373DLR Overview
A package called 48-BSSOP (0.295, 7.50mm Width) contains it. It is packaged in the way of Tape & Reel (TR). It is configured with an output of Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Electronic parts are mounted in accordance with Surface Mount. In order for it to operate, it needs a supply voltage of 3V~5.5V. It operates at -40°C~85°C degrees Celsius. In the 74AC series, this FPGA is located. With this electronic part, there are 8 bits. In this device, there are 48 terminations that have been designed. It is a member of the 74AC16373 family. The device is operated when the supply voltage is set to 5V. 48 pins are included. It is part of the family of electronic devices called AC. There are 48 pins on it. Surface Mount is the method used for mounting this electronic part. This device has 2 ports that can be connected to it. FF/Latches is the subcategory of this part. A voltage greater than 3V must be supplied as a power supply (Vsup). Input Lines consist of electronic circuits, and there are 16. Its reliable performance makes it an excellent choice for TR. With an output current of 24mA, it is highly flexible in terms of design. A high level of efficiency is achieved by maintaining the supply voltage at 5V. It consumes 8μA of quiescent current without being affected by external factors. A maximal power current (ICC) is generated for its operation at 0.08mA.
74AC16373DLR Features
48-BSSOP (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC16373 family
48 pin count
48 pins
74AC16373DLR Applications
There are a lot of Texas Instruments 74AC16373DLR Latches applications.
- Hammer
- Parallel Input
- Communication systems
- A/D and D/A conversion
- Parallel data synchronization
- Decade counting
- BCD counting
- Phase comparator
- Buffer register
- Stacked or Push-Down Registers
