74AC16373DLRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74AC16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 22.3 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 10.6 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 10 ns |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Output Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AC16373DLRG4 Overview
It is embedded in the 48-BSSOP (0.295, 7.50mm Width) package. A package of Tape & Reel (TR) has been used. The output it is configured with uses Tri-State. D-Type Transparent Latch is the logic type of this electrical device. The way in which this electronic part is mounted is Surface Mount. There is no supply voltage for this device. There is -40°C~85°C operating temperature. There are a number of FPGAs in this series, including this one. With this electronic part, there are 16 bits. This device has 48 terminations. It is a member of the 74AC16373 family. The device works with a voltage of 5V for its supply voltage. It is equipped with 48 pin count. This electronic device belongs to the family of AC. The 48 pins are designed into it. Electronic parts are mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. The part is in the FF/Latches subcategory. It is recommended to have a higher supply voltage (Vsup) than 3V. The reliability of this device makes it well suited to TR. Its 24mA output current allows for maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. It follows that 16 output lines are generated from the binary equivalent of the input line. Aquiescent current is consumed by 8μA without being affected by external forces. It consists of 2 elements. Its maximum current supply (ICC) reaches 0.08mA.
74AC16373DLRG4 Features
48-BSSOP (0.295, 7.50mm Width) package
74AC series
16 Bits
74AC16373 family
48 pin count
48 pins
2 elements
74AC16373DLRG4 Applications
There are a lot of Texas Instruments 74AC16373DLRG4 Latches applications.
- Parallel data storage
- Relay
- BCD counting
- Parallel Input
- Parallel Output
- Sample and hold register
- Timers
- Buffer register
- High-speed logic
- Programmable binary
