74AC16374DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Manufacturer Package Identifier | DL0048A |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74AC16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Clock Frequency | 100MHz |
| Propagation Delay | 21.2 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 7.6 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 17 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AC16374DL Overview
The item is packaged in 48-BSSOP (0.295, 7.50mm Width)cases. D flip flop is included in the Tubepackage. It is configured with Tri-State, Non-Invertedas an output. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 3V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74AC series. Its output frequency should not exceed 100MHz. The list contains 2 elements. It has been determined that there have been 48 terminations. The 74AC16374family includes it. The power supply voltage is 5V. JK flip flop input capacitance is 3pF farads. A device of this type belongs to the family of AC. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 48. This device exhibits a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. There are 16bits in its design. It is imperative that the supply voltage (Vsup) is maintained above 3Vin order to ensure normal operation. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If high efficiency is desired, the supply voltage should be kept at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. To operate, the chip has a total of 3 output lines. 8μAquiescent current consumed.
74AC16374DL Features
Tube package
74AC series
48 pins
16 Bits
74AC16374DL Applications
There are a lot of Texas Instruments 74AC16374DL Flip Flops applications.
- Consumer
- Circuit Design
- Asynchronous counter
- Memory
- Clock pulse
- Registers
- Shift registers
- CMOS Process
- Single Down Count-Control Line
- Communications
