74AC16374DLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74AC16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Clock Frequency | 100MHz |
| Propagation Delay | 21.2 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 7.6 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 17 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AC16374DLR Overview
48-BSSOP (0.295, 7.50mm Width)is the packaging method. You can find it in the Cut Tape (CT)package. The output it is configured with uses Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. It operates with a supply voltage of 3V~5.5V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. JK flip flop is a part of the 74ACseries of FPGAs. You should not exceed 100MHzin the output frequency of the device. A total of 2 elements are present. A total of 48terminations have been recorded. You can search similar parts based on 74AC16374. Power is supplied from a voltage of 5V volts. Its input capacitance is 3pF farads. Devices in the ACfamily are electronic devices. It is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 48. This device has the clock edge trigger type of Positive Edge. The RS flip flops belongs to Bus Driver/Transceiver base part number. This flip flop is designed with 16 Bits. For normal operation, the supply voltage (Vsup) should be kept above 3V. Considering its reliability, this T flip flop is well suited for TR. The D flip flop is embedded with 2ports. Optimal efficiency requires a supply voltage of 5V. As a result of its output current of 24mA, it is very flexible in terms of design. The JK flip flop is with 3 output lines to operate. There is 8μA quiescent current consumption by it.
74AC16374DLR Features
Cut Tape (CT) package
74AC series
48 pins
16 Bits
74AC16374DLR Applications
There are a lot of Texas Instruments 74AC16374DLR Flip Flops applications.
- Shift registers
- Storage registers
- Dynamic threshold performance
- Asynchronous counter
- Differential Individual
- Consumer
- High Performance Logic for test systems
- Pattern generators
- Latch
- Single Down Count-Control Line
