74AC174SC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 125MHz |
| Base Part Number | 74AC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 6 |
| Clock Frequency | 125MHz |
| Propagation Delay | 11.5 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 6 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC174SC Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. The package Tubecontains it. T flip flop is configured with an output of Non-Inverted. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. In this case, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. The FPGA belongs to the 74AC series. This D flip flop should not have a frequency greater than 125MHz. There are 1 elements in it. There is a consumption of 40μAof quiescent energy. It is a member of the 74AC174 family. A 4.5pFfarad input capacitance is provided by this T flip flop. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. Its clock edge trigger type is Positive Edge. The flip flop is designed with 6bits. The superior flexibility is achieved through the use of 7 circuits. There are 6 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. A -24mAis set for the high level output current. It is set to 24mAfor the low level output current. Temperatures below 85°Care ideal for operating. It should be higher than -40°Cwhen the system is operating. The RS flip flop is designed to operate with a minimal supply voltage of 2VV. 6Vis the maximum supply voltage supported by it. We are able to achieve a frequency of 125MHz.
74AC174SC Features
Tube package
74AC series
16 pins
6 Bits
74AC174SC Applications
There are a lot of ON Semiconductor 74AC174SC Flip Flops applications.
- Differential Individual
- ESD protection
- Shift registers
- Storage Registers
- Control circuits
- Set-reset capability
- Frequency division
- Dynamic threshold performance
- Automotive
- Synchronous counter
