74AC174SJ
| Parameters | |
|---|---|
| Propagation Delay | 11.5 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 6 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 125MHz |
| Base Part Number | 74AC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 6 |
| Clock Frequency | 125MHz |
74AC174SJ Overview
The package is in the form of 16-SOIC (0.209, 5.30mm Width). There is an embedded version in the package Tube. This output is configured with Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. A temperature of -40°C~85°C TAis considered to be the operating temperature. D-Typeis the type of this D latch. FPGAs belonging to the 74ACseries contain this type of chip. This D flip flop should not have a frequency greater than 125MHz. A total of 1elements are contained within it. It consumes 40μA of quiescent The 74AC174family includes it. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. The electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. In this device, the clock edge trigger type is Positive Edge. There are 6bits in this flip flop. Due to its superior flexibility, it uses 7 circuits. There are 6 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. This input has 3lines. In this case, the high level output current is set to -24mA. In the low level output current setting, the current is set to 24mA. Ideally, the operating temperature should be lower than 85°C. It is recommended that the operating temperature be greater than -40°C. The system operates with a minimum supply voltage of 2V. A maximum voltage of 6V can be provided by it. The frequency can be set to 125MHz.
74AC174SJ Features
Tube package
74AC series
16 pins
6 Bits
74AC174SJ Applications
There are a lot of ON Semiconductor 74AC174SJ Flip Flops applications.
- Asynchronous counter
- Synchronous counter
- Automotive
- Latch-up performance
- Cold spare funcion
- Memory
- EMI reduction circuitry
- Pattern generators
- ESD protection
- Modulo – n – counter
