74AC175PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 3.3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 244MHz |
| Family | AC |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74AC175PC Overview
16-DIP (0.300, 7.62mm)is the packaging method. It is included in the package Tube. T flip flop uses Differentialas the output. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. A 2V~6Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It belongs to the 74ACseries of FPGAs. There should be no greater frequency than 244MHzon its output. There are 1 elements in it. There is a consumption of 40μAof quiescent energy. Currently, there are 16 terminations. A voltage of 3.3V is used as the power supply for this D latch. JK flip flop input capacitance is 4.5pF farads. An electronic device belonging to the family ACcan be found here. In this case, the maximum supply voltage (Vsup) reaches 6V. Normal operation requires a supply voltage (Vsup) above 2V.
74AC175PC Features
Tube package
74AC series
74AC175PC Applications
There are a lot of Rochester Electronics, LLC 74AC175PC Flip Flops applications.
- Computers
- Cold spare funcion
- High Performance Logic for test systems
- Data transfer
- Clock pulse
- Buffer registers
- ESD performance
- Memory
- Divide a clock signal by 2 or 4
- Safety Clamp
