74AC175SC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 244MHz |
| Family | AC |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
74AC175SC Overview
The flip flop is packaged in a case of 16-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tube. Currently, the output is configured to use Differential. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. Currently, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74AC series. There should be no greater frequency than 244MHzon its output. D latch consists of 1 elements. This process consumes 40μA quiescents. It has been determined that there have been 16 terminations. The D flip flop is powered by a voltage of 3.3V . The input capacitance of this JK flip flopis 4.5pF farads. In this case, the D flip flop belongs to the ACfamily. In this case, the maximum supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be above 2V.
74AC175SC Features
Tube package
74AC series
74AC175SC Applications
There are a lot of Rochester Electronics, LLC 74AC175SC Flip Flops applications.
- Clock pulse
- Common Clocks
- ESD protection
- Differential Individual
- Parallel data storage
- Control circuits
- Registers
- Data storage
- Automotive
- Test & Measurement
