74AC175SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 244MHz |
| Base Part Number | 74AC175 |
| Function | Master Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 4 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 4 |
| Clock Frequency | 244MHz |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC175SJ Overview
The flip flop is packaged in a case of 16-SOIC (0.209, 5.30mm Width). As part of the package Tube, it is embedded. Differentialis the output configured for it. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. The type of this D latch is D-Type. JK flip flop belongs to the 74ACseries of FPGAs. Its output frequency should not exceed 244MHz Hz. In total, it contains 1 elements. There is 40μA quiescent consumption. JK flip flop belongs to 74AC175 family. A 4.5pFfarad input capacitance is provided by this T flip flop. There is an electronic part mounted in the way of Surface Mount. A total of 16pins are provided on this board. This device's clock edge trigger type is Positive Edge. There are 4bits in its design. Its flexibility is enhanced by 4 circuits. There are 2 output lines in this JK flip flop. Currently, there are 1 lines of input. In this case, the high level output current is set to -24mA. It is set to 24mAfor low level output current. Ideally, the operating temperature should be below 85°C. A temperature above -40°Cshould be used for the operation. Initially, it requires a voltage of 2V as the minimum supply voltage. It supports the maximal supply voltage of 6V. The frequency can be set to 244MHz.
74AC175SJ Features
Tube package
74AC series
16 pins
4 Bits
74AC175SJ Applications
There are a lot of ON Semiconductor 74AC175SJ Flip Flops applications.
- ESCC
- Frequency Dividers
- Bus hold
- Computers
- Latch-up performance
- Counters
- Storage registers
- Shift Registers
- Individual Asynchronous Resets
- Modulo – n – counter
