74AC273SJ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Supplier Device Package | 20-SOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74AC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 175MHz |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
74AC273SJ Overview
The flip flop is packaged in 20-SOIC (0.209, 5.30mm Width). You can find it in the Tubepackage. This output is configured with Non-Inverted. It is configured with the trigger Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. In the operating environment, the temperature is -40°C~85°C TA. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 74AC series. You should not exceed 175MHzin the output frequency of the device. A total of 1elements are contained within it. As a result, it consumes 40μA quiescent current. If you search by 74AC273, you will find similar parts. There is 4.5pF input capacitance for this T flip flop.
74AC273SJ Features
Tube package
74AC series
74AC273SJ Applications
There are a lot of ON Semiconductor 74AC273SJ Flip Flops applications.
- Latch-up performance
- Computers
- Functionally equivalent to the MC10/100EL29
- Storage registers
- Control circuits
- Shift Registers
- CMOS Process
- Frequency division
- Latch
- Data Synchronizers
