74AC373MTC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-TSSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74AC373 |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Delay Time - Propagation | 7ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC373MTC Overview
The package in which it is embedded is named 20-TSSOP (0.173, 4.40mm Width). The package is in the form of Tube. In this configuration, the output is set to Tri-State. This electrical device has the logic type D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. The voltage supply is 2V~6V. The temperature at which the machine is operating is -40°C~85°C. It is a type of FPGA belonging to the 74AC series. The design of this electronic part is based on 8 bits. As a member of the 74AC373 family, it falls under that category. In addition, it is designed with a pin number of 20. A Surface Mount mounting method has been used for this electronic part. An electronic circuit can be found on 2 input lines. It features maximum flexibility in design due to 24mA output current. The binary equivalent of the input line is generated by 8 output lines. The element count is 1. 8 circuits are used to achieve superior flexibility. It is set to zero for the low level output current. There is -24mA output current at the high level. Operating temperatures should be below 85°C. A temperature greater than -40°C should be used for operation. The maximum supply voltage is 6V. It operates with the minimal supply voltage of 2V.
74AC373MTC Features
20-TSSOP (0.173, 4.40mm Width) package
74AC series
8 Bits
74AC373 family
20 pins
1 elements
74AC373MTC Applications
There are a lot of ON Semiconductor 74AC373MTC Latches applications.
- Synchronous frequency dividers
- Automotive Cluster
- Relay replacement
- Frequency
- Network Switches
- A/D converters
- Hammer
- Parallel Input
- Double bus register system
- Decade counting
