74AC373MTR
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | TIN |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
74AC373MTR Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it. As a result, it has a packaging of Tape & Reel (TR). Tri-State is used for the output it is configured with. In this electrical device, the logic type is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. The voltage supply is 2V~6V. There is a temperature of -55°C~125°C at which the system operates. There are a number of FPGAs in this series, including this one. 8 Bits are used in the design of this electronic part. A device such as this has 20 terminations designed. There is no doubt that it belongs to the family 74AC373. In order to function, the supply voltage should be set to 3.3V. There are 20 pins on it. It is part of the family of electronic devices called AC. The 20 pins are designed into it. Surface Mount is the way in which this electronic part is mounted. This device is equipped with 2 ports. The part belongs to the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 6V. There should be a voltage supply (Vsup) greater than 2V. Electronic circuits are represented by 8 input lines. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
74AC373MTR Features
20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC373 family
20 pin count
20 pins
74AC373MTR Applications
There are a lot of STMicroelectronics 74AC373MTR Latches applications.
- Shift register
- High-speed logic
- Pseudo-random code generators
- Automotive ADAS
- Automotive Infotainment
- Shift Registers
- Parallel-to-Serial Data Conversion
- Parallel data synchronization
- Parallel data storage
- Flip-flops
