74AC373SCX
| Parameters | |
|---|---|
| Voltage - Supply | 2V~6V |
| Base Part Number | 74AC373 |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Delay Time - Propagation | 7ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
74AC373SCX Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. As a result, it has a packaging of Tape & Reel (TR). It uses the output configuration Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. A 2V~6V voltage supply is required for operation. There is a temperature of -40°C~85°C at which the system operates. In the 74AC series, this FPGA is located. An electronic part with 8 bits is designed. It is a member of the 74AC373 family. The device has 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. In the circuit, there are 2 input lines that are constituted by an electronic circuit. Input lines are converted into binary equivalents by 8 output lines. This element consists of 1. 8 circuits are used to achieve superior flexibility. The low level output current is set to 24mA. The high level output current is set to -24mA. Ideally, the operating temperature should be lower than 85°C. A temperature greater than -40°C should be used as the operating temperature. The supply voltage is limited to 6V. With a minimum supply voltage of 2V, it operates.
74AC373SCX Features
20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC373 family
20 pins
1 elements
74AC373SCX Applications
There are a lot of ON Semiconductor 74AC373SCX Latches applications.
- Parallel data storage
- Shift register
- Storage
- Buffer register
- Parallel-to-Serial Data Conversion
- Decade counting 7-segment decimal display
- Parallel data storage
- Communication systems
- Accumulator Registers
- Counter
