74AC373SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74AC373 |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Delay Time - Propagation | 7ns |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC373SJ Overview
A package called 20-SOIC (0.209, 5.30mm Width) contains it. The package is in the form of Tube. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch for this electrical device. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 2V~6V. A temperature of -40°C~85°C is set as the operating temperature. The 74AC series contains FPGAs of this type. It is designed with 8 bits. There is no doubt that it belongs to the family 74AC373. 20 pins are used in its design. The electronic part is mounted in a way that corresponds to Surface Mount. An electronic circuit can be found on 2 input lines. Regardless of the input line, the binary equivalent of the input line will be generated by the 8 output lines. 1 elements are present in it. In order to achieve its superior flexibility, 8 circuits are used. There is 24mA output current at the low level. -24mA represents the high level output current. Lower than 85°C is the recommended operating temperature. It is recommended to operate at a temperature higher than -40°C. There is a maximum voltage of 6V supported. A voltage of 2V is the minimum supply voltage required for it to operate.
74AC373SJ Features
20-SOIC (0.209, 5.30mm Width) package
74AC series
8 Bits
74AC373 family
20 pins
1 elements
74AC373SJ Applications
There are a lot of ON Semiconductor 74AC373SJ Latches applications.
- Automotive ADAS
- Synchronous frequency dividers
- Audio and video switching
- Automotive Infotainment
- Digital bus buffer
- Automotive Body Electronics
- Motor Drives
- Counter timers
- Bus system register with enable parallel lines at bus side
- Control circuits
