74AC373TTR
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
74AC373TTR Overview
20-TSSOP (0.173, 4.40mm Width) contains it. The package is in the form of Tape & Reel (TR). It is configured with an output of Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Surface Mount method. It operates with a supply voltage of 2V~6V. During operation, the temperature is set at -55°C~125°C. It is a type of FPGA belonging to the 74AC series. Electronic parts with 8 bits are designed for this application. This device is designed with 20 terminations. There is no doubt that it belongs to the family 74AC373. A 3.3V voltage supply is required for operation. There are 20 pins on it. It is part of the family of electronic devices called AC. 20 pins are used in its design. This electronic part is mounted in the way of Surface Mount. This device is equipped with 2 ports. There is a subcategory of FF/Latches for this part. 6V is the maximum supply voltage (Vsup). It is recommended to have a higher supply voltage (Vsup) than 2V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. This device is well suited for TAPE AND REEL based on its reliable performance. Input lines are generated as binary equivalents by 3 output lines.
74AC373TTR Features
20-TSSOP (0.173, 4.40mm Width) package
74AC series
8 Bits
74AC373 family
20 pin count
20 pins
74AC373TTR Applications
There are a lot of STMicroelectronics 74AC373TTR Latches applications.
- Counters
- Shift right with parallel loading
- Up/down difference counting
- Digital bus buffer
- Programmable binary
- Ring counter
- Storage
- Decade counting
- Automotive Body Electronics
- A/D converters
