74AC374MTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | TIN |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 270MHz |
| Propagation Delay | 16.5 ns |
| Turn On Delay Time | 5 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
74AC374MTR Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). The package Tape & Reel (TR)contains it. In the configuration, Tri-State, Non-Invertedis used as the output. Positive Edgeis the trigger it is configured with. It is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. Temperature is set to -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74AC series. Its output frequency should not exceed 270MHz Hz. In total, it contains 1 elements. It consumes 4μA of quiescent current without being affected by external factors. A total of 20 terminations have been made. The 74AC374 family contains it. The power source is powered by 3.3V. A 4pFfarad input capacitance is provided by this T flip flop. ACis the family of this D flip flop. Electronic part Surface Mountis mounted in the way. There are 20pins on it. In this device, the clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. The flip flop is designed with 8bits. It reaches the maximum supply voltage (Vsup) at 6V. Normally, the supply voltage (Vsup) should be kept above 2V. Due to its superior flexibility, it uses 8 circuits. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. There are 2 ports embedded in the flip flops. There are no output lines on the JK flip flop.
74AC374MTR Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
74AC374MTR Applications
There are a lot of STMicroelectronics 74AC374MTR Flip Flops applications.
- Frequency division
- Shift registers
- Bounce elimination switch
- CMOS Process
- Bus hold
- Data transfer
- Load Control
- Safety Clamp
- Digital electronics systems
- Individual Asynchronous Resets
