74AC374PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 155MHz |
| Family | AC |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 5.33mm |
| Length | 25.905mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74AC374PC Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). The package Tubecontains it. It is configured with Tri-State, Non-Invertedas an output. The trigger it is configured with uses Positive Edge. Through Holeis positioned in the way of this electronic part. A voltage of 2V~6Vis required for its operation. A temperature of -40°C~85°C TAis used in the operation. D-Typedescribes this flip flop. It belongs to the 74ACseries of FPGAs. You should not exceed 155MHzin the output frequency of the device. In total, it contains 1 elements. As a result, it consumes 40μA of quiescent current without being affected by external factors. A total of 20terminations have been recorded. A voltage of 3.3V is used as the power supply for this D latch. Input capacitance of this device is 4.5pF farads. In this case, the D flip flop belongs to the ACfamily. Vsup reaches its maximum value at 6V. Normal operation requires a supply voltage (Vsup) above 2V. A total of 2ports are embedded in the D flip flop.
74AC374PC Features
Tube package
74AC series
74AC374PC Applications
There are a lot of Rochester Electronics, LLC 74AC374PC Flip Flops applications.
- Data storage
- Registers
- Counters
- Circuit Design
- Differential Individual
- ATE
- Buffered Clock
- Shift registers
- Balanced Propagation Delays
- Synchronous counter
