74AC374PC
| Parameters | |
|---|---|
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 155MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 8 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Gates | 8 |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 155MHz |
| Base Part Number | 74AC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
74AC374PC Overview
It is packaged in the way of 20-DIP (0.300, 7.62mm). Package Tubeembeds it. Currently, the output is configured to use Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. Through Holeis in the way of this electric part. The JK flip flop operates at 2V~6Vvolts. -40°C~85°C TAis the operating temperature. This D latch has the type D-Type. The FPGA belongs to the 74AC series. A frequency of 155MHzshould be the maximum output frequency. The element count is 1 . T flip flop consumes 40μA quiescent energy. D latch belongs to the 74AC374 family. This T flip flop has a capacitance of 4.5pF farads at the input. There is an electronic part mounted in the way of Through Hole. It is designed with 20 pins. This device has Positive Edgeas its clock edge trigger type. 8bits are used in its design. Using 8 circuits, it is highly flexible. The 24mA output current allows it to be designed with the greatest amount of flexibility. It has 8 output lines to operate. The number of input lines is 1. -24mA is set as the high level output current. In the low level output current setting, 24mAis used. If the operating temperature is lower than 85°C, it is recommended. It is recommended that the operating temperature is higher than -40°C. Despite its minimal supply voltage of 2V, it is capable of operating. 6Vis the maximum supply voltage supported by it. The frequency can be set to 155MHz. A basic building block consists of 8 gates.
74AC374PC Features
Tube package
74AC series
20 pins
8 Bits
8 gates
74AC374PC Applications
There are a lot of ON Semiconductor 74AC374PC Flip Flops applications.
- Latch-up performance
- Patented noise
- Power down protection
- Differential Individual
- Registers
- Asynchronous counter
- Individual Asynchronous Resets
- Data transfer
- Shift registers
- Storage registers
