74AC374TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 270MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 5 ns |
| Family | AC |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74AC374TTR Overview
As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). The package Tape & Reel (TR)contains it. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 2V~6Vis used as the supply voltage. A temperature of -55°C~125°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. The 74ACseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 270MHz. There are 1 elements in it. There is 4μA quiescent consumption. Currently, there are 20 terminations. If you search by 74AC374, you will find similar parts. The D flip flop is powered by a voltage of 3.3V . The input capacitance of this JK flip flopis 4pF farads. In terms of electronic devices, this device belongs to the ACfamily of devices. This electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. There are 8bits in its design. There is a 6Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 2V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 3.3/5V power supplies. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order for the chip to function, it has 8output lines.
74AC374TTR Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
3.3/5V power supplies
74AC374TTR Applications
There are a lot of STMicroelectronics 74AC374TTR Flip Flops applications.
- Automotive
- Instrumentation
- High Performance Logic for test systems
- Modulo – n – counter
- Memory
- Guaranteed simultaneous switching noise level
- Safety Clamp
- Balanced 24 mA output drivers
- Computing
- Individual Asynchronous Resets
