74AC377MTC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 175MHz |
| Base Part Number | 74AC377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC377MTC Overview
20-TSSOP (0.173, 4.40mm Width)is the packaging method. D flip flop is embedded in the Tube package. In the configuration, Non-Invertedis used as the output. There is a trigger configured with Positive Edge. Surface Mountis occupied by this electronic component. A supply voltage of 2V~6V is required for operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. D-Typeis the type of this D latch. In this case, it is a type of FPGA belonging to the 74AC series. This D flip flop should not have a frequency greater than 175MHz. The list contains 1 elements. It consumes 40μA of quiescent current without being affected by external factors. It is a member of the 74AC377 family. Input capacitance of this device is 4.5pF farads. In this case, the electronic component is mounted in the way of Surface Mount. The 20pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. An electronic part with 8bits has been designed. 8 circuits are used to achieve its superior flexibility. With an output current of 24mA, this device offers maximum design flexibility. It operates with 8 output lines. This input has 1lines. A -24mAvalue is set for the high level output current. A 24mAvalue is set for low-level output current. Temperatures below 85°Care ideal for operating. Ideally, the operating temperature should be higher than -40°C. Normally, it operates with a voltage of 2VV as its minimum supply voltage. It is capable of supporting a maximum supply voltage of 6V. This frequency can be achieved at 175MHz.
74AC377MTC Features
Tube package
74AC series
20 pins
8 Bits
74AC377MTC Applications
There are a lot of ON Semiconductor 74AC377MTC Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Differential Individual
- Count Modes
- Power down protection
- EMI reduction circuitry
- Buffered Clock
- Synchronous counter
- Pattern generators
- Cold spare funcion
- Registers
