74AC573SC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74AC573 |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 8.5 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 8.5ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC573SC Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. Tube is the way it is packaged. It uses Tri-State as its output configuration. D-Type Transparent Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. A voltage of 2V~6V is used as the supply voltage for this device. The operating temperature is -40°C~85°C. The 74AC series is associated with this FPGA. Electronic parts with 8 bits are designed for this application. 74AC573 is the family name of it. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted using the Surface Mount method. Electronic circuits comprise 2 input lines. The 24mA output current gives it maximum design flexibility. 3 output lines provide binary equivalents of input lines. 1 elements are present in it. 8 circuits are used to provide this superior level of flexibility. It has been set to 24mA for the low level output current. In the high level output current, the value is set to -24mA. A temperature below 85°C should be used for operation. There should be a temperature above -40°C at which the device operates. There is a maximum voltage supply of 6V that can be applied to it. A minimal voltage of 2V is needed to operate it.
74AC573SC Features
20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC573 family
20 pins
1 elements
74AC573SC Applications
There are a lot of ON Semiconductor 74AC573SC Latches applications.
- Bus system register with enable parallel lines at bus side
- Automatic test equipment
- Address register
- Counting
- Shift left register
- Multistage ripple counting
- Counter control
- BCD counting
- Parallel data storage
- Shift right register
