74AC573SJX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74AC573 |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 7 ns |
| Turn On Delay Time | 8.5 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 8.5ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC573SJX Overview
It is embedded in the 20-SOIC (0.209, 5.30mm Width) package. A Tape & Reel (TR) package is used to package it. There is a Tri-State output configured. D-Type Transparent Latch is the logic type of this electrical device. Mounting this electronic component follows the Surface Mount method. It operates at a voltage of 2V~6V. It operates at -40°C~85°C degrees Celsius. 74AC is the series number of this FPGA. The electronic part in this image has 8 bits. This type belongs to the 74AC573 family. With the design of the board, there are only 20 pins. Electronic parts are mounted using the Surface Mount method. Electronic circuits comprise 2 input lines. 3 output lines provide binary equivalents of input lines. The element count is 1. To achieve its exceptional flexibility, it relies on 8 circuits. There is 24mA output current at the low level. The high level output current is set to -24mA. Ideally, the operating temperature should be lower than 85°C. There should be a temperature above -40°C at which the device operates. It supports a maximum supply voltage of 6V. This device requires a minimum voltage of 2V.
74AC573SJX Features
20-SOIC (0.209, 5.30mm Width) package
74AC series
8 Bits
74AC573 family
20 pins
1 elements
74AC573SJX Applications
There are a lot of ON Semiconductor 74AC573SJX Latches applications.
- Automotive HEV/EV Powertrain
- Motor Drives
- Pattern Generators
- Counter timers
- Parallel Input
- Watches
- Parallel data storage
- A/D and D/A conversion
- Sample and hold register
- Shift right register
