74AC573TTR
| Parameters | |
|---|---|
| Number of Terminations | 20 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 4.5 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
74AC573TTR Overview
There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). It is packaged in the way of Tape & Reel (TR). It uses Tri-State as the output. A D-Type Transparent Latch logic type is used in this electrical device. Based on the way of Surface Mount, this electronic part is mounted. The supply voltage of the device is 2V~6V. The operating temperature is -55°C~125°C. An FPGA in this series belongs to the 74AC family. The design of this electronic part is based on 8 bits. In this device, there are 20 terminations that have been designed. As a member of the 74AC573 family, it falls under that category. The device works with a voltage of 3.3V for its supply voltage. With 20 pins, it is equipped. There is a device in this electronic family called AC. This board has 20 pins on it, which is what it is designed for. It is mounted according to the Surface Mount method. In this device, there are 2 ports. 6V is the maximum voltage (Vsup) that can be supplied. There should be a voltage supply (Vsup) greater than 2V. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Input lines are converted into binary equivalents by 3 output lines.
74AC573TTR Features
20-TSSOP (0.173, 4.40mm Width) package
74AC series
8 Bits
74AC573 family
20 pin count
20 pins
74AC573TTR Applications
There are a lot of STMicroelectronics 74AC573TTR Latches applications.
- Data acquisition
- Flip-flops
- Relay
- Accumulator Registers
- Shift right register
- Parallel data storage
- Communication systems
- Shift right with parallel loading
- Buffer/Storage Registers
- Multi-line decoders
