74AC574SCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 153MHz |
| Base Part Number | 74AC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Output Current | 20mA |
| Number of Bits | 8 |
| Clock Frequency | 153MHz |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Frequency | 85MHz |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC574SCX Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. A package named Tape & Reel (TR)includes it. The output it is configured with uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 2V~6V. A temperature of -40°C~85°C TAis considered to be the operating temperature. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74ACseries of FPGAs. Its output frequency should not exceed 153MHz. In total, it contains 1 elements. As a result, it consumes 40μA quiescent current. The object belongs to the 74AC574 family. Its input capacitance is 4.5pFfarads. This electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. The clock edge trigger type for this device is Positive Edge. Flip flops designed with 8bits are used in this part. Using 8 circuits, it is highly flexible. In addition to its maximum design flexibility, the output current of the T flip flop is 20mA. It is designed with 3 output lines. The number of input lines is 1. It is set to -24mAfor the high level output current. There is no low level output current set at 24mA. A temperature below 85°Cis recommended for operation. If the operating temperature is higher than -40°C, the system should operate properly. It operates with the minimal supply voltage of 2V. There is a maximum supply voltage of 6V. It is possible to obtain a frequency of 153MHz.
74AC574SCX Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
74AC574SCX Applications
There are a lot of ON Semiconductor 74AC574SCX Flip Flops applications.
- Modulo – n – counter
- Supports Live Insertion
- Guaranteed simultaneous switching noise level
- Pattern generators
- Balanced Propagation Delays
- Clock pulse
- Consumer
- Patented noise
- Storage Registers
- Matched Rise and Fall
