74AC74MTC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 160MHz |
| Family | AC |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74AC74MTC Overview
14-TSSOP (0.173, 4.40mm Width)is the packaging method. D flip flop is embedded in the Tube package. It is configured with Differentialas an output. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. -40°C~85°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. It is a type of FPGA belonging to the 74AC series. You should not exceed 160MHzin the output frequency of the device. The element count is 2 . It consumes 20μA of quiescent 14terminations have occurred. The D flip flop is powered by a voltage of 3.3V . Input capacitance of this device is 4.5pF farads. Devices in the ACfamily are electronic devices. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. The supply voltage (Vsup) should be maintained above 2V for normal operation.
74AC74MTC Features
Tube package
74AC series
74AC74MTC Applications
There are a lot of Rochester Electronics, LLC 74AC74MTC Flip Flops applications.
- EMI reduction circuitry
- Count Modes
- Instrumentation
- Single Down Count-Control Line
- Control circuits
- Frequency Dividers
- Circuit Design
- Individual Asynchronous Resets
- Dynamic threshold performance
- Registers
