74AC74MTR
| Parameters | |
|---|---|
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 300MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 5 ns |
| Family | AC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 90000000Hz |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
74AC74MTR Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. A package named Tape & Reel (TR)includes it. Currently, the output is configured to use Differential. It is configured with a trigger that uses Positive Edge. It is mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. It is at -55°C~125°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. The 74ACseries comprises this type of FPGA. A frequency of 300MHzshould not be exceeded by its output. T flip flop consumes 2μA quiescent energy. A total of 14terminations have been recorded. The 74AC74 family contains this object. It is powered from a supply voltage of 3.3V. Its input capacitance is 3pF farads. It belongs to the family of electronic devices known as AC. There is an electronic component mounted in the way of Surface Mount. 14pins are included in its design. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. There is a 6Vmaximum supply voltage (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. The superior flexibility of this circuit is achieved by using 2 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The power supply is 3.3/5V. As a result of its output current of 24mA, it is very flexible in terms of design. The JK flip flop is with 1 output lines to operate.
74AC74MTR Features
Tape & Reel (TR) package
74AC series
14 pins
3.3/5V power supplies
74AC74MTR Applications
There are a lot of STMicroelectronics 74AC74MTR Flip Flops applications.
- Test & Measurement
- Reduced system switching noise
- Bounce elimination switch
- Control circuits
- Bus hold
- Dynamic threshold performance
- Pattern generators
- EMI reduction circuitry
- Set-reset capability
- Single Down Count-Control Line
