74AC74PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 3.3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 160MHz |
| Family | AC |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
74AC74PC Overview
The flip flop is packaged in a case of 14-DIP (0.300, 7.62mm). It is included in the package Tube. As configured, the output uses Differential. The trigger it is configured with uses Positive Edge. Through Holeis positioned in the way of this electronic part. With a supply voltage of 2V~6V volts, it operates. The operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. It belongs to the 74ACseries of FPGAs. It should not exceed 160MHzin its output frequency. D latch consists of 2 elements. This process consumes 20μA quiescents. 14terminations have occurred. It is powered by a voltage of 3.3V . The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Electronic devices of this type belong to the ACfamily. As soon as Vsup reaches 6V, the maximum supply voltage is reached. For normal operation, the supply voltage (Vsup) should be kept above 2V.
74AC74PC Features
Tube package
74AC series
74AC74PC Applications
There are a lot of Rochester Electronics, LLC 74AC74PC Flip Flops applications.
- Counters
- Bus hold
- Convert a momentary switch to a toggle switch
- Divide a clock signal by 2 or 4
- Clock pulse
- EMI reduction circuitry
- Matched Rise and Fall
- Latch-up performance
- Safety Clamp
- Test & Measurement
