74AC74SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~6V |
| Frequency | 165MHz |
| Base Part Number | 74AC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 2 |
| Clock Frequency | 160MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 4 |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74AC74SJ Overview
It is embeded in 14-SOIC (0.209, 5.30mm Width) case. It is included in the package Tube. There is a Differentialoutput configured with it. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. -40°C~85°C TAis the operating temperature. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74ACseries contain this type of chip. It should not exceed 160MHzin its output frequency. A total of 2 elements are present. This process consumes 20μA quiescents. This D latch belongs to the family of 74AC74. Its input capacitance is 4.5pF farads. A part of the electronic system is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. This device has Positive Edgeas its clock edge trigger type. An electronic part designed with 2bits is used in this application. Its flexibility is enhanced by 2 circuits. It operates with 2 output lines. As of now, there are 4input lines. The high level output current is set to -24mA. In the low level output current setting, 24mAis used. It is recommended that the operating temperature be lower than 85°C. Ideally, the operating temperature should be higher than -40°C. A minimum supply voltage of 2V is required for these RS flip flops to operate. 6Vis the maximum supply voltage supported by it. We are able to achieve a frequency of 165MHz.
74AC74SJ Features
Tube package
74AC series
14 pins
2 Bits
74AC74SJ Applications
There are a lot of ON Semiconductor 74AC74SJ Flip Flops applications.
- Control circuits
- Modulo – n – counter
- Cold spare funcion
- Registers
- Memory
- Parallel data storage
- Shift Registers
- Divide a clock signal by 2 or 4
- Common Clocks
- Data Synchronizers
