74AC74TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 300MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 5 ns |
| Family | AC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 90000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AC74TTR Overview
It is embeded in 14-TSSOP (0.173, 4.40mm Width) case. You can find it in the Tape & Reel (TR)package. This output is configured with Differential. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. Currently, the operating temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. In this case, it is a type of FPGA belonging to the 74AC series. It should not exceed 300MHzin terms of its output frequency. It consumes 2μA of quiescent current without being affected by external factors. There are 14 terminations,If you search by 74AC74, you will find similar parts. An input voltage of 3.3Vpowers the D latch. JK flip flop input capacitance is 3pF farads. In terms of electronic devices, this device belongs to the ACfamily of devices. There is an electronic part that is mounted in the way of Surface Mount. This board has 14 pins. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. 6Vis the maximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 2V. 2 circuits are used to achieve its superior flexibility. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. The D latch runs on a voltage of 3.3/5V volts. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
74AC74TTR Features
Tape & Reel (TR) package
74AC series
14 pins
3.3/5V power supplies
74AC74TTR Applications
There are a lot of STMicroelectronics 74AC74TTR Flip Flops applications.
- Buffered Clock
- Storage Registers
- Patented noise
- Dynamic threshold performance
- Frequency Divider circuits
- Shift registers
- ESD protection
- Data storage
- High Performance Logic for test systems
- Test & Measurement
