74ACQ574PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACQ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74ACQ574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 90MHz |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
74ACQ574PC Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). It is included in the package Tube. T flip flop uses Tri-State, Non-Invertedas the output. It is configured with a trigger that uses a value of Positive Edge. There is an electrical part that is mounted in the way of Through Hole. Powered by a 2V~6Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74ACQ series. You should not exceed 90MHzin its output frequency. In total, it contains 1 elements. It consumes 40μA of quiescent If you search by 74ACQ574, you will find similar parts. A JK flip flop with a 4.5pFfarad input capacitance is used here.
74ACQ574PC Features
Tube package
74ACQ series
74ACQ574PC Applications
There are a lot of ON Semiconductor 74ACQ574PC Flip Flops applications.
- ESCC
- Cold spare funcion
- Functionally equivalent to the MC10/100EL29
- Frequency division
- Event Detectors
- ESD protection
- Latch-up performance
- Bounce elimination switch
- Dynamic threshold performance
- Asynchronous counter
