74ACT109
| Parameters | |
|---|---|
| Surface Mount | YES |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Family | ACT |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | J-KBAR FLIP-FLOP |
| Max I(ol) | 0.024 A |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 13 ns |
| fmax-Min | 125 MHz |
| Max Frequency@Nom-Sup | 125000000Hz |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
74ACT109 Overview
In the configuration of the trigger, POSITIVE EDGEis used. A total of 16 terminations have been made. An input voltage of 5Vpowers the D latch. This D flip flop belongs to the family of ACT. This part is included in FF/Latches. It is designed with a number of bits of 2. The maximal supply voltage (Vsup) reaches 5.5V. Normally, the supply voltage (Vsup) should be kept above 4.5V. The D latch runs on a voltage of 5V volts. J-KBAR FLIP-FLOPis the logic IC it uses. A total of 2 functions are provided by this T flip flop. This device is equipped with a pin count of 16.
74ACT109 Features
2 Bits
5V power supplies
2 Functions
16 pin count
74ACT109 Applications
There are a lot of Fairchild (ON Semiconductor) 74ACT109 Flip Flops applications.
- Set-reset capability
- EMI reduction circuitry
- Common Clocks
- Power down protection
- Buffer registers
- Supports Live Insertion
- Clock pulse
- Safety Clamp
- Counters
- Event Detectors
