74ACT109MTC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | JK Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Clock Frequency | 210MHz |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
74ACT109MTC Overview
16-TSSOP (0.173, 4.40mm Width)is the packaging method. D flip flop is embedded in the Tube package. Differentialis the output configured for it. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. It is operating at a temperature of -40°C~85°C TA. Logic flip flops of this type are classified as JK Type. The FPGA belongs to the 74ACT series. Its output frequency should not exceed 210MHz. D latch consists of 2 elements. It consumes 20μA of quiescent JK flip flop belongs to 74ACT109 family. The input capacitance of this JK flip flopis 4.5pF farads.
74ACT109MTC Features
Tube package
74ACT series
74ACT109MTC Applications
There are a lot of ON Semiconductor 74ACT109MTC Flip Flops applications.
- Cold spare funcion
- Parallel data storage
- Differential Individual
- Circuit Design
- EMI reduction circuitry
- Bounce elimination switch
- CMOS Process
- Modulo – n – counter
- ESD protection
- Power down protection
