74ACT109PC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | JK Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 210MHz |
| Base Part Number | 74ACT109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 2 |
| Clock Frequency | 210MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 5 |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT109PC Overview
The package is in the form of 16-DIP (0.300, 7.62mm). You can find it in the Tubepackage. T flip flop is configured with an output of Differential. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis used as the supply voltage. It is operating at a temperature of -40°C~85°C TA. The type of this D latch is JK Type. It belongs to the 74ACTseries of FPGAs. A frequency of 210MHzshould be the maximum output frequency. A total of 2elements are contained within it. As a result, it consumes 20μA quiescent current and is not affected by external forces. If you search by 74ACT109, you will find similar parts. The input capacitance of this JK flip flopis 4.5pF farads. Electronic part Through Holeis mounted in the way. The 16pins are designed into the board. There is a clock edge trigger type of Positive Edgeon this device. An electronic part designed with 2bits is used in this application. Due to its superior flexibility, it uses 2 circuits. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. There are 2 output lines on it. The number of input lines is 5. -24mA is set as the high level output current. The low level output current is set to 24mA. Operating temperatures should be lower than 85°C. A temperature above -40°Cshould be used for the operation. It operates with the minimal supply voltage of 4.5V. 5.5Vis its maximum supply voltage. It is possible to obtain a frequency of 210MHz.
74ACT109PC Features
Tube package
74ACT series
16 pins
2 Bits
74ACT109PC Applications
There are a lot of ON Semiconductor 74ACT109PC Flip Flops applications.
- Balanced Propagation Delays
- Divide a clock signal by 2 or 4
- Computers
- Frequency Divider circuits
- Memory
- Reduced system switching noise
- Data storage
- Frequency Dividers
- Cold spare funcion
- Computing
