74ACT11074DRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT11074 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 125MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 5.7 ns |
| Family | ACT |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
74ACT11074DRG4 Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. It is contained within the Tape & Reel (TR)package. As configured, the output uses Differential. The trigger it is configured with uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis used in the operation. This electronic flip flop is of type D-Type. The FPGA belongs to the 74ACT series. A frequency of 125MHzshould not be exceeded by its output. It consumes 4μA of quiescent current without being affected by external factors. A total of 14terminations have been recorded. You can search similar parts based on 74ACT11074. A voltage of 5V is used as the power supply for this D latch. Input capacitance of this device is 3.5pF farads. It belongs to the family of electronic devices known as ACT. It is mounted in the way of Surface Mount. 14pins are included in its design. Its clock edge trigger type is Positive Edge. It is included in FF/Latches. In order to achieve its superior flexibility, 2 circuits are used. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. An electrical current of 5V volts is applied to it. If high efficiency is desired, the supply voltage should be kept at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. There are 1 output lines in this JK flip flop.
74ACT11074DRG4 Features
Tape & Reel (TR) package
74ACT series
14 pins
5V power supplies
74ACT11074DRG4 Applications
There are a lot of Texas Instruments 74ACT11074DRG4 Flip Flops applications.
- Modulo – n – counter
- Dynamic threshold performance
- Asynchronous counter
- Digital electronics systems
- CMOS Process
- Communications
- Bounce elimination switch
- Clock pulse
- Patented noise
- Latch-up performance
