74ACT11074N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74ACT11074 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 125MHz |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 5.7 ns |
| Family | ACT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ACT11074N Overview
The item is packaged in 14-DIP (0.300, 7.62mm)cases. It is included in the package Tube. This output is configured with Differential. It is configured with a trigger that uses Positive Edge. Through Holeis in the way of this electric part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In the operating environment, the temperature is -40°C~85°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74ACTseries contain this type of chip. A frequency of 125MHzshould be the maximum output frequency. During its operation, it consumes 4μA quiescent energy. 14terminations have occurred. You can search similar parts based on 74ACT11074. A voltage of 5V provides power to the D latch. JK flip flop input capacitance is 3.5pF farads. It belongs to the family of electronic devices known as ACT. Through Hole mounts this electronic component. A total of 14pins are provided on this board. Its clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. Its superior flexibility is attributed to its use of 2 circuits. There are 5V power supplies attached to it. If high efficiency is desired, the supply voltage should be kept at 5V. Featuring the maximum design flexibility, it has an output current of 24mA . It has 1 output lines to operate.
74ACT11074N Features
Tube package
74ACT series
14 pins
5V power supplies
74ACT11074N Applications
There are a lot of Texas Instruments 74ACT11074N Flip Flops applications.
- EMI reduction circuitry
- Divide a clock signal by 2 or 4
- Modulo – n – counter
- Synchronous counter
- Asynchronous counter
- Consumer
- Control circuits
- ESD performance
- Counters
- ESCC
