74ACT11139D
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Base Part Number | 74ACT11139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Power Dissipation | 774mW |
| Number of Bits | 4 |
| Throw Configuration | DP4T |
| Propagation Delay | 7.8 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Power Supply Current-Max (ICC) | 0.08mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Additional Feature | CENTER VCC/GND PINS |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
74ACT11139D Overview
In order to conserve board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).It is packaged according to the Tube method.As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.The operating temperature of -40°C~85°C will not be susceptible to external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74ACT series are suitable for a wide range of applications.Among its basic configurations are 16 terminations.The base part number is 74ACT11139, which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V volts.Signal switch has 16 component pins.Conductors terminate at GULL WING in this design.There is a type of supply of Single.It is configured with 16 pins.The mounting point is Surface Mount.The logic switch is included into the family of ACT.In this signal multiplexer, there are 4 bits provided.In order to maintain mux switch's normal operation, power is provided to 5V.The turn signal switch has 4 outputs designed for operation.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.No external influence consumes 8μA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.Additionally, CENTER VCC/GND PINS provides improved characteristics.Normally, the digitalswitch consists of 2 circuits.
74ACT11139D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
CENTER VCC/GND PINS
74ACT11139D Applications
There are a lot of Texas Instruments 74ACT11139D Signal Switches / Multiplexers / Decoders applications.
- LVDS
- CPU memory location identification
- Time division multiplexing system
- Steel plants
- Analog to digital conversion
- Decimal decoder
- Idle motor
- Enabling block of memory depending on address in memory chips
- Signal router
- Data demultiplexing
